MIRAGE 54 MAY  DEAL on DEAL 2 ARTR  allmost ready to run. We will supply it with servos and waterproof switch already fitted so that only your receiver and battery is needed, at NO EXTRA COST. This deal is available from until May 31st

video of mirage 54
This is our new 27 to 30cc gas and 15cc nitro racing DeepV  that we designed and developed to race in Offshore races and to run in rough water in UK.  54 ins 1370mm long long and normally fitted with 5" wooden rails  It is the only REAL RACING BOAT ARTR AVAILBLE. 

All of our racing boats are made from epoxy and glass or carbon kevlar and are vacuum moulded with multiple layers of material. This gives a very light and strong moulding which is far better than normal fibreglass. Do not confuse these boats with normal fibreglass boats. These are top quality lightweight epoxy mouldings made with up to 5 layers of glass or  4 layers of glass one of carbon and  kevlar and slow setting epoxy resin which means no distortion, no gel coat cracks  and they are VERY strong. These boats are hand laid up in a ceramic mould. The mould and moulding are vacuum bagged and left in an oven for 16 hours at 50C and then post cured at 25C for 24 hours after removal from the mould.  They are then joined with kevlar or glass and again cured overnight in the oven. This makes for an extremely strong, stiff and lightweight racing boat. Carbon kevlar is incredibly difficult to damage. The engine tank cover is made from epoxy glass to prevent radio problems.

MIRAGE 54 (EK) Carbon/ Kevlar Epoxy with rails. Standard racing version of Mirage. Carbon/kevlar epoxy hull with rails fitted and  glass/epoxy engine cover. This is supplied unpainted with carbon/kevlar pattern hull and translucent engine cover