PMB PRESTWICH Model BoatsPMB PRESTWICH Model Boats
Home  Contact  
phone 07842 634090  ORDERING shipping
         SECURE ONLINE ORDERING           
FSRV Model Boats          Gas Tuned Pipes    Tiger King engines  Kraken mono   Zenoah Marine Engines   Flexishafts

                                                                FSRV Propshafts rudders couplings
                                                                  
   Home FSRV       
                                                                                               
PROPELLER SHAFTS The best prop shaft assemblies in the world where the propeller thrust is taken on the top ballrace.        .
BR87  Propeller shaft and tube assembly for 3.5cc  boats. Thrust system on the top ballrace increases performance greatly over normal propshafts. 3.5cc has 16mm stainless steel ballrace in small diameter brass housing for low shaft angle position. Housing is not fitted so that shaft can be custom fitted to each boat and housing can be soldered to the tube.. Stainless lower bearing support. 5mm  thick steel skeg, stainless steel tube with diameter of  8mm is for LOW drag.   Steel  5mm shaft 

wpeC5.jpg (15726 bytes)
28.90


BR87A  Propeller shaft and tube assembly for 7.5  boats. Thrust system on the top ballrace increases performance greatly over normal propshafts. 16mm stainless steel ballrace in small diameter brass housing for low shaft angle position. Propshaft support is bigger than on the BR87. Housing is not fitted so that shaft can be custom fitted to each boat and housing can be soldered to the tube. 8mm stainless steel thickwalled tube, Steel 5mm shaft 
wpeC5.jpg (15726 bytes)
32.00


BR88  Propeller shaft and tube assembly for  15cc and 27cc  boats. Thrust system on the top ballrace increases performance greatly over normal propshafts. 19mm stainless steel ballrace in small diameter brass housing for low shaft angle position. Housing is not fitted so that shaft can be custom fitted to each boat and housing can be soldered to the tube. 8mm stainless steel thickwalled tube Steel 5mm shaft 
wpeC5.jpg (15726 bytes)
32.00


BR89
 For 15cc and 27cc engines. Same as BR88 but with aluminium bearing housing fitted with 2 stainless steel ballraces.   Stainless steel tube and lower bearing support. 5mm x 37mm strong  steel skeg, Stainless steel Thickwalled tube diameter of 8mm. Steel 5mm shaft.  wpe8B.jpg (16842 bytes)

 wpe89.jpg (22818 bytes)

39.00

BR92 Small bearing housing for 5mm shafts suitable for 3.5cc, 7.5cccc. wpeAC.jpg (22597 bytes) 22.95

BR93 Bearing housing for 5mm shafts suitable for 7.5cc, 26cc and 15cc. Contains 2 stainless steel bearings.

15.95

BR94 Stainless steel thrust collar  5mm id. 14mm od. wpeB6.jpg (8586 bytes) 2.95
BR99 Stainless steel shaft 5mm with M5 thread at the propeller end. 400mm long.              

9.00

BR98 Hardened ground  steel shaft 5mm with M5 thread, ultra accurate, strong and straight . 400mm long.              
12.00


BR23A 4 x spare 5mm bore x 7mm od steel/teflon bushes for BR88, BR89, BR92 ballraced shafts   4 pcs.

   wpe42.jpg (10680 bytes)

2.95

WP22

 

 

 

Rudder, waterproof with water overflow system. Body has INA top seal with CNC aluminium body, 2 sintered bronze oilite bushes.  5mm hard stainless shaft bronze welded to laser cut stainless steel blade rudder blade 55mm deep for 3.5cc .       wpe8.jpg (5087 bytes)   24.95

WP23 Rudder, waterproof with water overflow system. Body has INA top seal with CNC aluminium body, 2 sintered bronze oilite bushes.  5mm hard stainless shaft micro-laser welded to laser cut stainless steel blade rudder blade 65mm deep, 41 wide at top,  30 wide at bottom. for 7.5cc        wpe8.jpg (5087 bytes) 24.95


WP24 Rudder, waterproof with water overflow system. Body has INA top seal with CNC aluminium body, 2 sintered bronze oilite bushes.  5mm hard stainless shaft micro-laser welded to laser cut stainless steel blade rudder blade 71mm deep, for 15cc and gasboats.        wpe8.jpg (5087 bytes) 24.95


WP29 2 rudder lip seals, 9mm od, 5mm id, 2mm wide .wpe73.jpg (25026 bytes)            3.95


WP3 Spare stainless steel rudder  3.5cc. blade 55mm deep. 5mm diameter shaft with 1.5mm thick blade

The rudder shaft and rudder blade are slotted so that they lock together and then they are silver soldered together. Very strong.

 wpe92.jpg (11313 bytes) 9.95


WP4 Spare stainless steel rudder 7.5cc. blade  65mm deep. 5mm diameter shaft with 1.5mm thick blade

The rudder shaft and rudder blade are slotted so that they lock together and then they are silver soldered together. Very strong.

wpe92.jpg (11313 bytes).            8.95


WP5 Spare rudder 15cc and 27cc. blade 71mm deep. 5mm diameter shaft with 1.5mm thick blade

The rudder shaft and rudder blade are slotted so that they lock together and then they are silver soldered together. Very strong.

wpe92.jpg (11313 bytes)            

9.95

WP6A Aluminium CNC machined 5mm rudder arm wpe17.jpg (13293 bytes) 5.50


WP6C Aluminium CNC machined single-sided rudder arm, 5mm bore. armsingletop.jpg (22172 bytes) wpeCC.jpg (12374 bytes)
4.50
WP6D Aluminium CNC machined single-sided rudder arm, 4mm bore. armsingletop.jpg (22172 bytes) wpeCC.jpg (12374 bytes)
4.50
WP42 6mm Aluminium rudder arm for WP40 and quickchange rudders wpe17.jpg (13293 bytes) 5.95

QUIET ENGINE MOUNTS
RM45 New 15cc motor mount, Complete assembled unit ready to fit with 4 rubber mounts and mounting plates. Can also be used with 5" rails in FSRO/Mono boats.  wpe3F.jpg (53537 bytes) 

no stock
 39.95

CNC1  Mini Kali type coupling for 3.5cc    5mm  x 5mm. 20mm diameter, 40mm long but can be shortened to 32mm long.  wpe2B.jpg (34673 bytes)  no stock
25.95


CNC2  Mini Kali type coupling for 3.5cc    6mm  x 5mm. 20mm diameter, 40mm long but can be shortened to 32mm long.  wpe2B.jpg (34673 bytes)  NO STOCK
25.95

CNC1A Mini Kali rubber coupling centre for CNC1 and CNC2 wpe49.jpg (14023 bytes)  2.95
CNC3 Midi Kali type coupling for 7.5cc    7mm x 5mm. with very small diameter. 24mm diameter x 40mm long.

 

  wpe2B.jpg (9082 bytes)  

28.95

CNC3A Midi Kali coupling centre for CNC3   wpe49.jpg (14023 bytes)   2.95
CNC4 Kali type aluminium coupling for geared 15cc with 8mm plain diameter to  5mm. FSRV 26mm diameter x 40mm long wpe49.jpg (29403 bytes) NO STOCK
28.95

CNC5 Kali type aluminium coupling for 15cc,  M8 x 5mm.  The best coupling in the world for 15cc motors in FSRV 26mm diameter x 40mm long wpeAE.jpg (31339 bytes) NO STOCK
28.95

CNC5A Kali coupling rubber centre for CNC4, CNC5 and CNC7 8mm long wpe49.jpg (14023 bytes) 2.95

CNC6A Kali coupling rubber centre for CNC6, 13mm long wpe49.jpg (14023 bytes) 2.95

CNC7 RUBBER COUPLING with starter pulley .  CNC aluminium ends with  to fit Zenoah Tiger King etc to 5mm plain  shaft. Tapered inside to fit onto the crankshaft taper

    wpe9F.jpg (101793 bytes) wpeA1.jpg (124014 bytes)

30.95