| ZENSP2 |
ZENOAH
G260PUM marine, 260PU 260PUH 260RC 25.4cc 34mm PISTON |
 |
£15.95
|
| ZENSP295A |
ZENOAH
28.5cc 36mm PISTON |
|
£16.95
|
| ZENSP2A |
ZENOAH
CNC machined
LIGHTENED 20 gram piston for ZEN7 race engine and any 25.4cc zenoah.
More rpm, less stress on bearings and crankshaft
|
 |
£29.95
|
| ZENSP3 |
ZENOAH 260
all 25.4cc
Spare 34mm piston
ring
|
 |
£5.95
|
| ZENSP295B |
ZENOAH
290
all 28.5cc
Spare 36mm piston
ring
|
|
£5.95
|
| ZENSP4 |
Zenoah G260 PUM marine spare cylinder
|
 .
|
£34.00
|
| ZENSP5 |
Zen 260 crankshaft for G260PUM marine, 260PU 260PUH
|
|
£27.95
|
| ZENSP5A |
Zenoah 260 1mm stroker crankshaft 29mm
stroke. Makes the engine capacity 26.33cc
|
|
£49.00
|
| ZENSP5B |
Zenoah 260 2mm stroker crankshaft 29mm
stroke. Needs a small modification to the crankcase to fit. Makes the
engine capacity 27.24cc
|
|
£49.00
|
| ZENSP5C |
1 main bearing for Zenoah. Genuine Zenoah NSK C3
bearing with the big radius on inner race.
|
|
.
£7.50
|
| ZENSP6 |
Piston pin clips for all Zenoah Sikk RCMK engines(2)
|
|
.
£1.50
|
| ZENSP6A |
Piston pin Zenoah 25.4cc
|
|
.
£2.95
|
| ZENSP6B |
Piston pin needle roller 25.4cc 22.5cc
|
|
.
£4.95
|
| ZENSP6C |
Piston pin spacer washer
|
|
.
£1.95
|
| ZENSP6D |
Front and rear crankshaft seals for all Zenoahs.
231 and 260 PUM
|
|
.
£4.95
|
| ZENSP7 |
Zenoah PUM crankcase with bearings
and seals already installed. |
 |
£28.00
|
| ZENSP8 |
Zenoah grey ignition coil |
 |
£38.95
|
| ZENSP9 |
Zenoah red Source coil |
 |
£48.95
|
| ZENSP9A |
Zenoah
2 low drag seals precision made from bearing grade phosphor bronze. Easy
to fit, just push into existing rubber seals to give more rpm and power.
NEW
|
 |
£10.95
|
| ZENSP10 |
Zenoah 260PUM flywheel |
 |
£24.00
|
| ZENSP10A |
Zenoah 260PUM flywheel
key |
 |
£1.40
|
| ZENSP11 |
Genuine
Zenoah G260 PUM pullstart
|
 |
.
£24.95
|
| ZENSP11A |
Genuine Zenoah EZE Start.
1 genuine Zenoah EZ start
pullstart for marine and heli. Spring loaded internally to make starting
much easier with less effort required. Complete kit includes 1 x Zenoah
Starter Assembly 848-ESZ-7510, 1 x Pulley 848-ESZ-7520, 4 x Spacer
848-8Y4-6100, 4 x Screw 0260-30420, 1 x Piston Stopper 4810-96220, 1 x
Printed Instructions 848-ESZ-93A0
|
 |
.
£37.95
|
| ZENSP11B |
Pullstart pawl made from aluminium for Zenoah pullstarts.
|
 |
.
£3.95
|
| ZENSP12 |
Zenoah G260 PUM standard waterjacket
and nipples |
 |
£5.00
|
| ZENSP12A |
NGK CMR 7 H Sparkplug. Best plug for all
Zenoah's
|
 |
£5.95
|
| ZENSP13 |
Walbro gasket/seal/diaphragm set for 257, 644, 813 etc carbs
|
 |
£9.50
|
| ZENSP13A |
Walbro 2 diaphragms for 257, 644, 813 WYK etc
|
 |
£4.30
|
| ZENSP14 |
Zenoah
PUM, PUH, PU standard base
gasket |
 |
£1.40
|
| ZENSP14A |
Zenoah
PUM, PUH, PU
0.5mm (.020")
copper base gasket |
 |
£4.95
|
| ZENSP14B |
Zenoah
PUM, PUH, PU
0.12mm (.005")
copper base gasket |
 |
£4.95
|
| ZENSP14C |
Zenoah
PUM, PUH, PU 0.3mm (.012")
copper base gasket |
|
£4.95
|
| ZENSP15 |
Insulator block and
carb gasket all
zenoahs |
 |
.
£2.50
|
| ZENSP22 |
Crankcase
genuine zenoah gasket
|
 |
£2.50
|
| ZENSP23 |
Crankcase
genuine zenoah gasket set
|
 |
£5.95
|
| ZENSP15A |
Teflon
insulator block gaskets
|
 |
£2.50
|
| ZENSP16 |
Zenoah stock insulator block |
 |
£6.95
|
| ZEN516 |
ALUMINIUM
INSULATOR BLOCK/carb flange with thicj k fibre gaskets. Block is machined with
raised edges to prevent the gaskets being distorted. Better performance
and no more distorted flanges. |
 |
£17.95
|
| ZENSP17 |
Zenoah exhaust gasket (2) |
 |
.
£2.80
|
| ZENSP18 |
Special
double sealed bearing. Replaces the front oil seal to make the motor
into a 3 bearing crank. Seal is a special petrol resistant type.
|
 |
.
£5.95
|
| ZENSP19 |
Aluminium billet velocity stack for
Walbro carbs
|
 |
£4.95
|
| ZENSP19A |
LONG Aluminium billet velocity stack for
Walbro carbs
|
 |
£4.95
|
| ZENSP20 |
2 sets of water jacket orings. (4
orings)
|
 |
£2.95
|
| ZENSP21 |
Zenoah
plastic velocity stack for walbro carbs 644, 813 and 257 |
 |
.
£1.95
|
|
|
|
|
|
|
|
|
Copyright Dave Marles