|
PMB PRESTWICH
Model Boats
email
phone 07842 634090
Mercury
52 F1 Tunnel
Home
Gas Tuned Pipes Tiger
King engines Kraken mono
|
. |
This is our new 27 to
30cc gas and 15cc nitro F1 style tunnel hull, made from vacuumed epoxy and
carbon.
1320mm long, 550mm
wide.
|
. |
|
.
|
All of our racing boats are
made from epoxy and glass or carbon kevlar and are vacuum moulded with
multiple layers of material. This gives a very light and strong moulding
which is far better than normal fibreglass. Do not confuse these
boats with normal fibreglass boats. These are top quality lightweight
epoxy mouldings made with up to 5 layers of glass reinforced with
carbon and slow setting epoxy resin which means no distortion, no
gel coat cracks and they are VERY strong. The mould and
moulding are vacuum bagged and left in an oven for 16 hours at 50C and
then postcured at 25C for 24 hours after removal from the mould.
They are then joined with kevlar or glass and again cured overnight in the
oven. This makes for an extremely strong, stiff and lightweight racing
boat.
|
. |
|
MERC
|
Mercury
52 F1 Tunnel boat carbon epoxy vacuum
moulded with rails. The
boat
is supplied with hull and deck joined, unpainted with a clear gel over carbon. This is done
for light weight and strength.
|
£495.00
|
|
.
|
|
. |
| .. |
. |
. |
|
