PMB PRESTWICH Model Power Boats   
 email   phone 07842 634090

NEW FSRV Boat ikarus 3  NEW
HOME main website    Home FSRV   
DRAKKON 7.5cc   FSRV TORNADO T7.4

Ikarus 3 New for 2021, Redesigned and slightly bigger than the Ikarus 2.3  5mm wider 30mm longer with more accurate rails and a new design deck. The full length engine/tank cover is recessed into the deck. Ikarus IK3 testing video

wpe7.jpg (50921 bytes) wpeB7.jpg (57037 bytes)

IK3/Kevlar IKARUS 3 moulded from vacuum epoxy carbon/kevlar and glass.  Hull and deck are joined together  with deck openings cut (cut small so that the builder can enlarge them if necessary). Very light and very stiff.  Includes separate epoxy glass tank and  engine cover. 
 
370.00

 

IK3/Carbon IKARUS 3 moulded from vacuum epoxy carbon.  Hull and deck are joined together  with deck openings cut (cut small so that the builder can enlarge them if necessary). Very light and very stiff.  Includes separate carbon tank and  engine cover.     
  
wpeCC.jpg (25054 bytes) wpeC8.jpg (31104 bytes)
400.00


 

IK3cover Tank and engine cover in  epoxy glass.

 

55.00

 

IK3covercarbon Tank and engine cover in  carbon 75.00

 

IKwing Carbon wing/handle. Lightweight vacuum moulded carbon wing. Wing is cut oversize and must be finished by the buyer.wpe28.jpg (53242 bytes) 24.00


     
     
Latest version that I race uses IKC/Kevlar4 Ikarus epoxy vacuum glass/carbon boat with tank cover and tuned Mito hybrid engine on the Mocom Valvola gearbox and B50 Mocom propeller.  Other parts used.  BR87 propshaft, WP23 rudder, PT3A fuel tank, CS11 tuned pipe at 185mm length, GA1A waterscoop, PT13 tank mounting,  GA36 radio hatch cover, GA13 servo mounting tray, 2 trim tabs TTAB1, FC1 float chamber and carbon wing CW1 and side wings SW1. ce
Hit Counter   24905