PMB PRESTWICH Model Boats
Home  Contact   phone 07842 634090  ORDERING shipping
         SECURE ONLINE ORDERING           
FSRV Model Boats   Gas Tuned Pipes    Tiger King engines  Kraken mono   Zenoah Marine Engines   Flexishafts

                                                                                                                        Boat Hardware Parts    Fast  RC Electric Boats  

        
                                                                                                                                                            TRIM TABS, T- BARS

Flexishaft assemblies

Drive dogs
Thrust washers

 Stingers Struts Coupling flexis Rudders Surface   Turn fins Flexitubes
       
HF109B Micro trim tabs (2) for fast electric with screw adjustment. Each tab is 30mm wide 37mm long. wpe1.jpg (11209 bytes) £5.95
HF109A 2  piece set of mini trim tabs. Stainless steel and CNC aluminium trim tabs for DeepV type boats. 32mm long,38mm wide.   2 pieces.

NEW

 wpeF8.jpg (27060 bytes)
£8.95
HF109 2  piece set of trim tabs. Stainless steel and CNC aluminium trim tabs for DeepV type boats. 45mm long, 57mm wide.   2 pieces wpeC3.jpg (63503 bytes)
£9.95
HF108 SMALL   4 piece set of trim tabs. Stainless steel and CNC aluminium trim tabs for DeepV type boats. 45mm long, 57mm wide.   4 pieces. wpe34.jpg (22085 bytes)  
£16.50
HF106 LARGE stainless steel and CNC aluminium trim tabs for DeepV type boats. 48mm long, 76mm wide.   2 pieces. wpe4.jpg (41179 bytes)  
 £14.95
HF100 NEW CNC machined aluminium T-Bar propshaft support. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes). brass lubrication point included for lubricating shaft. For supporting the tube in mono's .

wpe1.jpg (6927 bytes)    

  
£15.95


HF101 NEW CNC machined aluminium T-Bar propshaft support with oil cup for lubricating the shaft. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's .

wpe34.jpg (9819 bytes)    

  
 £22.95
HF102  CNC machined aluminium COMPETITION T-Bar propshaft support with oil reservoir  for lubricating the shaft. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's . Each end is adjustable for length, oil resevoir inside.

    wpe88.jpg (13882 bytes)

   
 £17.95
HF103 NEW CNC machined aluminium  T-Bar propshaft support with adjustment LEFT and RIGHT and UP and DOWN for ease of fotting. Fits between 5" rails and suitable for 1/4" flexishafts (11/32 or 5/16 tubes).. For supporting the tube in mono's . 

    wpeAF.jpg (44648 bytes)

   
 £21.95
HF104 NEW CNC machined aluminium  tube holder for cats and hydros 

    wpeC0.jpg (6802 bytes)

   
 £19.95
TTAB4 Exterior type R/C  trim tab for boats 7.5 to 27cc .wpe7.jpg (10795 bytes) wpe87.gif (3657 bytes)
£27.00

 
TTAB1 1 x New design trim tab. Uses POM acetal for the tab inside a cnc machined aluminium housing with 4mm operating arm. Fully waterproof and accurate trimming with very low drag. Small 3.5/7.5 size 30mm X 50mm wpe184.jpg (263499 bytes) wpe187.jpg (4043 bytes) wpe189.jpg (3175 bytes) wpe18B.jpg (4164 bytes)


£22.00
TTAB2 1 x New design trim tab. Uses POM acetal for the tab inside a cnc machined aluminium housing with 4mm operating arm. Fully waterproof and accurate trimming with very low drag.  Large 15cc/27cc size  40mm x 65mm . wpe184.jpg (263499 bytes) wpe187.jpg (4043 bytes) wpe189.jpg (3175 bytes) wpe18B.jpg (4164 bytes)
£25.00