PMB Model Boats   
home  security  about  ordering-shipping  currency converter
  
email  here for price and delivery quote.  phone 07842 634090
Panther 46  
Racing mono for Zenoah 25.4cc gas engines.  Gas Tuned Pipes
THE PANTHER DEAL 2 or DEAL 4 AND SIGMA 51  THE ARE THE FASTEST BOATS OF THIS KIND THAT YOU CAN BUY.  Nothing else comes close. These boats are made from vacuum moulded, heat treated epoxy glass and carbon kevlar and are far higher quality in every way than boats made from normal fibreglass.  Kevlar is  normally used in the manufacture of bullet proof vests! 

Panther 46. 1165mm long (46"). Very fast and stable circuit racing and FSRO mono V boat for Zenoah gas engines.. The Panther is a competition boat for racing with other boats in the oval and offshore classes but is a great fun boat and will make the other gas boats look like snails in comparison.  Compared to our older racing boat the Lynx, the Panther 46 is wider at the front for smoother/safer cornering, longer rails for high speed stability, less V angle at the rear and much less V at the front, this stops 'chine walking' and improves stability everywhere making  the Panther very forgiving at high speed and combined with the rail design at the front lets the boat go smoothly through the corners without losing too much speed and without getting upset by the wash from other boats. The Panther also has small chine rails only at the front and a flatter chine line at the front to prevent  diving (submarining) in choppy water/race conditions. click here for LYNX - PANTHER COMPARISONS


wpe9.jpg (72787 bytes)
..
Panther made with  epoxy/glass, vacuum bagged and cured in an oven for maximum strength.
£275.00
Panther made with epoxy and carbon and kevlar, vacuum bagged and cured in an oven for maximum strength. Incredibly strong and light.
£385.00
wpe1.jpg (100530 bytes) .
Do not confuse these boats with normal fibreglass boats. These are top quality lightweight epoxy mouldings made with up to 5 layers of glass or  4 layers of glass one of carbon and  kevlar and slow setting epoxy resin which means no distortion, no gel coat cracks  and they are VERY strong. These boats are hand laid up in the ceramic mould. The mould and moulding are vacuum bagged and left in an oven for 16 hours at 50C and then postcured at 25C for 24 hours after removal from the mould.  They are then joined with kevlar or Glass and again cured overnight in the oven. This makes for an incredibly strong, stiff and lightweight racing boat. Carbon kevlar is incredibly difficult to damage.  .
Panther DEAL 1. Consists of Panther epoxy vacuum glass joined boat with ZEN2 Zenoah 25.4cc Petrol pullstart engine, exhaust manifold(adapter), silenced tuned pipe, Quiet motor mounts, 1/4" flexishaft assembly including brackets, tube, drive dog etc.and  CNC machined wedge rudder assembly with built in waterscoop, large radio box, flexishaft coupling, fuel tank, quick release hatch clips,  balanced-sharpened bronze racing propeller, aerial, radio linkages, rubber bellows.  Very fast.  Special  price. 


 £760.00

Panther DEAL 2.     Consists of Panther epoxy vacuum glass joined boat with ZEN7 Full race Zenoah 25.4cc Petrol pullstart racing 7.3 bhp engine, special watercooled exhaust adapter, watercooled silenced tuned pipe, quiet quick change motor mounts, 1/4" flexishaft assembly including brackets, tube, drive dog etc.and  CNC machined wedge rudder assembly with built in waterscoop, large radio box, flexishaft coupling, fuel tank, quick release hatch clips,  balanced sharpened bronze racing propeller, aerial, radio linkages,  2 rubber bellows. The Panther Deal 2 and Deal 4 are the fastest boat kits available anywhere.  Normal price.   £965.00, Special price £895.00. 
£895.00
Panther DEAL 4. Consists of Panther epoxy vacuum CARBON and KEVLAR joined boat with ZEN7 Full race Zenoah 25.4cc Petrol pullstart racing 7.3 bhp engine, special watercooled exhaust adapter,  watercooled silenced tuned pipe, quiet quick change quiet motor mounts, 1/4" flexishaft assembly including strut, brackets, tube, drive dog etc. and  CNC machined wedge rudder assembly with built in waterscoop, large radio box, radio box rubber bellows seals, Flexishaft coupling, fuel tank, fuel tubing, quick release hatch clips,  balanced and  sharpened bronze racing propeller, aerial, radio linkages, watercooling tubing.  Normal price £1075.00.  Special price £995.00.   
 
£995.00
Panther below is a custom carbon kevlar Panther with nitro CMB  RS91DM belonging to Gordon Telfer MN USA.
wpe1.jpg (58643 bytes) wpe8.jpg (58624 bytes) .
wpeB.jpg (23667 bytes)
Hit Counter 120306     pantherpics
 WE SHIP WORLDWIDE  email  here  Phone.  UK  07842 634090  international  00447842 634090.       PMB,  Mill St, Golborne,  Warrington,  WA3 3QJ.  England.  Model boats of all types including FSRV, FSRH, FSRO Offshore,  Deepvee, fast electric, cats, zenoah gas boats.     Visa LogoMastercard LogoMaestro LogoElectron Logo