| . |
PROPELLER SHAFTS |
The best prop shaft assemblies in the
world where the propeller thrust is taken on
the top ballrace.
|
. |
| BR87 |
Propeller
shaft and tube assembly for 3.5cc and 7.5cc boats. Thrust system on the top
ballrace increases performance greatly over normal propshafts. 3.5cc
has 16mm stainless steel ballrace with small diameter housing for low
shaft angle position. Housing is not fitted so that shaft can be custom
fitted to each boat. Housing can be soldered or loctited to the
tube. Stainless steel 5mm shaft. Stainless lower bearing support. 5mm thick
steel skeg, tube diameter is 8mm for LOW drag.
|
|
£28.90
|
BR88A
|
For
15cc engines. Same as BR87 but with bigger 19mm diameter stainless steel top
ballrace and
bigger housing. plus 2 lead teflon bearings at the propeller end with
wider skeg/propshaft support. Stainless steel 5mm shaft. 8mm Diameter tube
with 10mm dia lower bearing housing from stainless steel. TUBE length 260mm. |
|
£29.90
|
BR88B
|
For
15cc engines. Same as BR87 but with bigger 19mm diameter stainless steel top
ballrace and
bigger housing. plus 2 lead teflon bearings at the propeller end with
wider skeg/propshaft support. Stainless steel 5mm shaft. 8mm Diameter tube
with 10mm dia lower bearing housing from stainless steel. TUBE length 300mm |
|
£29.90
|
BR88C
|
For
15cc engines. Same as BR87 but with bigger 19mm diameter stainless steel top
ballrace and
bigger housing. plus 2 lead teflon bearings at the propeller end with
wider skeg/propshaft support. Stainless steel 5mm shaft. 8mm Diameter tube
with 10mm dia lower bearing housing from stainless steel.TUBE length 330mm |
|
£29.90
|
BR88D
|
For
15cc engines. Same as BR87 but with bigger 19mm diameter stainless steel top
ballrace and
bigger housing. plus 2 lead teflon bearings at the propeller end with
wider skeg/propshaft support. Stainless steel 5mm shaft. 8mm Diameter tube
with 10mm dia lower bearing housing from stainless steel. Bearing housing
is not soldered to the tube so that length can be altered by the boat
builder. |
|
£29.90
|
| BR90 |
Bearing
housing for 5mm shafts suitable for 26cc and 15cc. Contains 3 stainless
steel bearings and thrust collar. 4mm mounting holes. |
|
£18.90
|
| BR86 |
Spring steel 5mm
propshaft threaded M5. Best German quality shaft with CNC cut thread. Almost unbreakable.
Use on all boats but especially 15cc and 27cc |
 |
£9.00
|
| BR89 |
Hardened
ground tool steel shaft 5mm with M5 thread. Suitable for 3.5cc and 7.5cc. |
|
£8.00
|
| WP22
|
Rudder, waterproof with water
overflow system. Body has INA top seal with CNC aluminium
body, 2 sintered bronze oilite bushes. 5mm hard stainless shaft bronze
welded to laser cut stainless steel blade rudder blade 55mm deep for 3.5cc
. |
 |
£19.95
|
| WP23 |
Rudder, waterproof with water
overflow system. Body has INA top seal with CNC aluminium
body, 2 sintered bronze oilite bushes. 5mm hard stainless shaft
micro-laser welded to laser cut stainless steel blade rudder blade 65mm
deep, 41 wide at top, 30 wide at bottom. for 7.5cc
|
|
£19.95
|
| WP24 |
Rudder, waterproof with water
overflow system. Body has INA top seal with CNC aluminium
body, 2 sintered bronze oilite bushes. 5mm hard stainless shaft
micro-laser welded to laser cut stainless steel blade rudder blade 71mm
deep, for 15cc and gasboats.
|
|
£19.95
|
| WP3 |
Spare welded rudder blade and shaft
3.5cc blade 55mm deep |
.
|
£6.50
|
| WP4 |
Spare
micro-laser welded stainless steel rudder blade and shaft 7.5cc
blade 65mm deep |
.
|
£6.50
|
| WP5 |
Spare
micro laser welded rudder blade and shaft
15cc. blade 71mm deep |
|
£6.50
|
| WP6A |
Aluminium
CNC machined 5mm rudder arm |
 |
£3.00
|
